PE electronic wire in the electronics industry is an indispensable product, no one electronic products need to use electronic lines, electronic lines can be divided into row of mother, row of two, with the development of science and technology, more and more industries To use the electronic line, and how to distinguish between good and bad is that many people do not know.
When we buy PE electronic lines, we must see the performance of electronic lines, different PE electronic wire has a different performance, and most of the PE electronic wire can not be cross-use, which will directly affect the quality of the product.
In China, the use of PE electronic wire is generally made out of the. In general, the important is through: drawing, twisting, covering these three processes to complete the production, of course, if the model specifications of the complex conditions, repeatability is likely to be higher. Briefly described as follows:
Covered. Credentials of wire and cable is not the same as the functional conditions, to take a special equipment in the conductor outside the coating is not the same material. Its craft points:
Wraps: Ribbon tape, mica tape, E-glass fiber belt, non-woven fabrics, plastic tape, etc., linear cotton yarn, silk and other fiber materials.
Longitudinal bag: rubber, wrinkled aluminum material.
Squeeze package: rubber, plastic, lead, aluminum and other materials.
Dip coating: insulation paint, asphalt and so on.
Twisted. The twisting process is divided into conductor twisted, stranded, braided, wire mounted and wound. In order to promote the softness of the wire and cable, the overall degree, so that more than two single lines, according to the provisions of the direction of intertwined in the way known as the twisted.
Drawing. Pull the system: single-wire drawing and drawing system. In the metal pressure processing, the metal is forced to pass through the mold (press wheel) under the external force value, the metal cross-sectional area is compressed, and the conditional cross-sectional shape of the shape and size of the technical processing of the implementation of the way known as metal drawing.

PE electronic wire in different applications, have different production standards, including: specifications, PE electronic wire thickness, material and so on. Because now the car is more and more important decoration, and now also has specialized in the production of automotive applications in the PE line. How to identify the pros and cons of electronic lines? Xiaobian below to answer this question for everyone:
1, the formal PE electronic wire, insulated rubber with a new anti-oxidation PVC plastic, wire core conductor used to create air-free copper (OFC) or tinned copper, or silver plated copper. After precision equipment manufactured by Seiko.
2, high-quality PE electronic wire is not only insulation, heat resistance is good, and the core conductor with seven pairs of twist or weave, so that there is sufficient density to reduce the resistance, capacitance and inductance, and thus output enough Current flow.
3, and some irregular manufacturers, insulating rubber is recycled PVC plastic, wire core conductor with recycled copper, or copper clad aluminum, or steel wire, or a mixture of these. As we all know. These conductors are much larger than the internal resistance of oxygen-free copper (OFC), and the pressure drop is much greater. This is only 12V of the car power is very harmful.
4, to determine the merits of PE electronic lines, can not just look at its appearance size, more important to see inside the copper core thickness and the pros and cons. Because some PE electronic lines will be very thick and the inside of the copper core is not proportional, do very fine. So the main depends on the size of copper core cut to confirm.
In fact, PE electronic lines also depends on the actual length of each line and the nominal is consistent, there is no short jin missing two of the phenomenon. A lot of businesses are short jin less two, so that caused the application of electronic wire security issues.